
Cold floors, musty smells, and high energy bills are signs the space under your home needs attention. We fix it from the ground up.

Crawl space insulation in Gilroy creates a thermal barrier between the ground and your living area, reducing heat loss in winter and heat gain in summer - most projects are completed in one to two days. The space under your home acts like a buffer zone, and if it is uninsulated or the insulation has degraded over time, that buffer stops working.
Many Gilroy homes built between the 1960s and 1990s have vented crawl spaces with little or no effective insulation remaining. Owners in these homes often notice cold floors in winter, higher-than-expected energy bills year-round, and a musty smell that drifts up from below - especially after rain. Crawl space insulation addresses all three of those problems when it is installed correctly and moisture is handled at the same time.
Many homeowners also pair this work with a wall insulation upgrade to seal the home from the crawl space up for a complete thermal envelope.
If you walk across your kitchen or living room on a cool January morning and the floor feels noticeably cold - especially near the edges of the room - the space below is not insulated well. Gilroy winters are mild overall, but nighttime temperatures regularly drop into the 30s and 40s, which is cold enough to make uninsulated floors uncomfortable.
Gilroy's wet season runs from November through April, and that is when crawl spaces without proper moisture protection tend to show their problems. If you notice a damp, earthy, or musty smell in your home after a rainy stretch - particularly near the floor or in a hallway above the crawl space - moisture is getting in below and needs to be addressed.
If you have ever peeked through the access door and seen insulation that is hanging down, falling apart, or missing in patches, it is no longer doing its job. Fiberglass insulation that gets wet loses most of its effectiveness and can become a home for mold or pests over time.
A past water leak under the house - even one that was repaired - can leave insulation saturated and compromised. If you have had rodents or other pests in your crawl space, they often damage or displace insulation as they nest. Either situation is worth having a contractor assess before the next heating season.
We install fiberglass batts and spray foam depending on what your crawl space needs. Fiberglass batts are installed between the floor joists above and work well for straightforward vented crawl spaces. Spray foam costs more upfront but does a better job blocking both air and moisture - it is often the right choice when the crawl space is being sealed as part of the project. We also pair insulation with a crawl space vapor barrier when ground moisture is a factor, which it frequently is in Gilroy's older housing stock.
For homes built in the 1960s through 1980s, we often recommend sealing the crawl space and insulating the walls rather than just the floor above. This treats the crawl space as part of the home's thermal envelope rather than as outdoor space - a more effective approach for Gilroy's climate where winters are damp and summers are hot. Every job starts with an in-person assessment so we can recommend the right approach for your specific setup.
A cost-effective choice for vented crawl spaces where the primary goal is reducing heat loss through the floor.
Best for sealed crawl spaces or when air and moisture sealing matter as much as thermal performance.
Added when ground moisture is present - creates a physical barrier between the soil and your home's structure.
Recommended for older Gilroy homes with vented designs that let damp outside air flow freely under the house.
Gilroy experiences a Mediterranean climate - summers regularly push into the 90s, and winters bring cool, wet conditions from November through March. That seasonal swing means your crawl space faces both heat stress in summer and moisture intrusion in winter. A significant portion of the city's single-family homes were built between the 1960s and 1990s, when vented crawl spaces were standard construction. Those older vented designs let outside air - and outside moisture - flow freely under your home for decades.
Gilroy is also surrounded by active farmland, and the area's air carries elevated dust and agricultural particulates during harvest season. An unsealed crawl space can pull that outdoor air up through gaps in your floors and into your living space. Homeowners in Morgan Hill and Scotts Valley face similar conditions, and we regularly work in those communities alongside Gilroy. Sealing and insulating the crawl space reduces that pathway, which matters especially for households with allergy or asthma concerns. For more on how moisture affects crawl spaces, the EPA's moisture and mold guidance is a solid resource.
We respond within 1 business day. When you reach out, we will ask a few basic questions - your address, the approximate size of your home, and whether you have noticed any specific problems like moisture or cold floors. This helps us come prepared with the right equipment.
Before quoting anything, we physically enter your crawl space to check the existing insulation, look for signs of moisture or mold, assess how the space is vented, and measure the area. This visit usually takes 30 to 60 minutes. Make sure the access door or hatch is not blocked.
After the assessment, you receive a written quote that breaks down what work will be done, what materials will be used, and the total cost - including whether a permit is required for your specific project. No verbal-only quotes.
The crew works below the house while you go about your day. When the work is done, we walk you through what was installed - either with photos from inside the crawl space or at the access point. All debris is removed from your property the same day.
We respond within 1 business day - no obligation. After you submit, someone from our office will call to schedule a free on-site estimate. We assess your crawl space, explain the options, and quote everything in writing before any work begins.
(669) 345-1323California requires insulation contractors to hold a valid CSLB license. We carry ours on every job. You can verify any contractor on the CSLB website in about 30 seconds - and we encourage you to check ours before signing anything.
Crawl space work in Gilroy sometimes requires a permit through the City of Gilroy Building Division - particularly if we are sealing the space or changing ventilation. We identify whether a permit is needed and handle pulling it, so unpermitted work does not become your problem at resale.
Installing insulation over an active moisture problem makes things worse, not better. We check for ground moisture, mold, and failed vapor barriers before recommending any insulation approach - because doing it in the right order is the only way the results last.
We serve 12 communities from Gilroy to San Jose, and our crews know the housing patterns in this region - including the vented crawl space designs common in homes built here during the 1960s through 1980s. That local knowledge affects the recommendations we make. The ENERGY STAR program at energystar.gov outlines the installation standards we follow.
Every crawl space job we complete is assessed in person, permitted when required, and installed to California energy standards. That combination is what protects your home long-term and protects you at resale.
Extend your home's thermal protection from the crawl space up through the walls with properly installed wall insulation.
Learn moreA ground vapor barrier is often installed alongside crawl space insulation to block moisture from rising up through the soil.
Learn moreGilroy's wet season starts in November - call (669) 345-1323 or submit a request today to schedule your free estimate before the ground gets saturated.